Automatic strip feed press is designed to perform cutting and stamping of tin ends, lids, and rings. The strip is separated by vacuum suckers from the magazine and a pneumatic piston is pushing it to the feeding fingers. Strip feeding to the die is performed by double finger bar to have possibility using of double die. The feeding fingers are getting force from the crankshaft by chain. All linear movements on the strip feeding unit are guided by linear-bearing system.
Pneumatic operated disc clutch and spring brake system
Machine is developed to obtain maximum die life
Mechanical overload protection on the ram
Non-stop strips stacker system avoids stopping the machine while feeding the magazine
The PLC control system and the display provide easy use and follow all alarm messages
Central lubrication system controlled by PLC
Safety devices provide control of double strip feed, stuck in die area, stuck at skeleton strip eject area, low air pressure and operator safety guards
MAC/1024 | MAC/1025 | MAC/1026 | |
Capacity | 40 tons | 50 tons | 60 tons |
Ram Stroke | 30 - 90 mm | 100 mm | 130 mm |
Cutting Diameter | 100 - 220 mm | 100 - 250 mm | 100 - 220 mm |
Maximum Strip Width | 230 mm | 260 mm | 230 mm |
Strip Length | 600 - 1040 mm | 600 - 1040 mm | 600 - 1040 mm |
Stroke Amount | 120 stroke/minute | 100 stroke/minute | 60 stroke/minute |
Angle of the press | 600 | 600 | 300 |
Strip Stacking Height | 250 mm | 250 mm | 250 mm |
Air Pressure of Operation | 6 bar | 6 bar | 6 bar |
Total power | 6 kW | 8 kW | 8 kW |